싸이러스 싸이러스 제품소개입니다.

응용사례 (Solution & Applications)

3-11. 적용 사례 및 논문 (Application for Industrial and Papers)상위메뉴 >

자동차 및 일반 수송분야
  • T. Lauwagie, J. Strobbe, E. Dascotte, J. Clavier, M, Monteagudo, Optimization of the Dynamic Response of a Complete Exhaust System, presented at the International Seminar on Modal Analysis 2008 (ISMA), September 15-17, 2008, Leuven, Belgium.
    (다운로드 PDF GO )
  • E. Dascotte, J. sTROBBE, Identification of Gas Flow Pressure Force in a Cavity using an lnverse Method.
    Procedings of the 23rd International Seminar on Modal Analysis (ISMA), September 16-18, 1998, Leuven, Belgium.
    (다운로드 PDF GO )
  • T.Koizumi, N.TsUJIUCHI (Doshisha Univesity), I. kubomoto, E. Ishida (Kubota Corp.), F. Ohtani, Optimizing a Tractor Frame for Improved Cabin NVH, SAE off Highway Engineering, Sptember 2000, pp45-49
  • T. Koizumi, N.T sujiuchi, S. Sawabe (Doshisha Univesity), I. Kubomoto, E. Ishida (Kubota Corp.), Structural Optimization of Tractor Frame for Noise Reduction, Proceedings of the 4th International Conference on Motion and Vibration Control (MOVIC), ETH Zurich, Swirzeland, 1998.
  • E. Dascotte, P. Vanhonacker, An Integrated Approach to Finite Element Model Validation: Software Tools and Case Study in Automotive Industry, SAE Noise & Vibration Conference, May 1993. Traverse City, Michigan, USA.
헬리콥터 브레이드
회전부품의 동적 거동을 결정하는 가장 중요한 분석 중 하나는 Campbell 다이어그램의 결정으로 고유진동수 대 각속도의 변화를 보여준다. 기본 아이디어는 FEMTools을 사용하여 브레이드의 FE 모델을 확인한 다음 업데이트 되지 않은 모델로 얻은 Campbell 다이어그램과 업데이트 된 모델의 차이를 조사하는 것이다.
  • J. Guggenberger, MI 17 Fire Firefighting Helicopter Boom - Validation and Updating of the Analytical Models.  Presented at  the 2002 NAFEMS Conference on Validation of FEM Analysis, November 13-14, Wiesbaden, Germany.
    (다운로드 PDF go)
  • M. Mergeay, J.-S. Servaye, E. Dascotte, Integration of NVH Testing: A Case Study on a Spatial Structure. Presented at  the 2002 International Seminar on Modal Analysis (ISMA), September 16-18, 2002, Leuven, Belgium.
    (다운로드 PDF go)
  • E. Dascotte, A. Schoenrock, Validation and Updating of an Aeroengine Finite Element Model based on Static Stiffness Testing. Presented at the 2nd MSC Aerospace Conference, June 7-11, 1999, Long Beach, CA, USA.
    (다운로드 PDF go)
토목공학에서의 응용사례
회전부품의 동적 거동을 결정하는 가장 중요한 분석 중 하나는 Campbell 다이어그램의 결정으로 고유진동수 대 각속도의 변화를 보여준다. 기본 아이디어는 FEMTools을 사용하여 브레이드의 FE 모델을 확인한 다음 업데이트 되지 않은 모델로 얻은 Campbell 다이어그램과 업데이트 된 모델의 차이를 조사하는 것이다.
  • C.E. Ventura et al., FEM Updating of Tall Buildings Using Ambient Vibration Data, Presented at the EURODYN 2005 Conference, September 4-7, 2005, Paris, France.
    (다운로드 PDF go)
  • Jean-Francois Lord, Carlos E. Ventura, Eddy Dascotte, Automated Model Updating using Ambient Vibration Data from a 48-Storey Building in Vancouver. Proceedings of the 22th International Modal Analysis Conference (IMAC), January 2004, Detroit, Michigan.
    (다운로드 PDF go)
  • Jean-Francois Lord, Carlos E. Ventura, Eddy Dascotte, Rune Brincker, and Palle Andersen, FEM Updating using Ambient Vibration Data from an 48-Storey Building in Vancouver, British Columbia, Canada. Presented at the 32nd International Congress and Exposition on Noise Control Engineering (Internoise 2003), August 25.28, South Korea.
    (다운로드 PDF go)
  • H. Haapaniemi, P. Luukkanen, P. Nurkkala, J. Rostedt, A. Saarenheimo, Correlation Analysis from Modal Analysis of a Pipeline. Proceedings of the 21th International Modal Analysis Conference (IMAC), February 2003, Orlando, Florida.
    (다운로드 PDF go)
  • Aleksandar Pavic, Taufik Widjaja and Paul Reynolds, The Use Of Modal Testing And FE Model Updating To Investigate Vibration Transmission Between Two Nominally Identical Building Floors, Proceedings of the 3rd International Conference on Structural Dynamics Modeling - Test, Analysis, Correlation and Validation - Madeira Island, Portugal, June 2002
  • Mehdi H.K. Kharrazi, C.E. Ventura, R. Brincker. E. Dascotte, A Study on Damage Detection using Output-Only Modal Data. Proceedings of the 20th International Modal Analysis Conference (IMAC), February 2002, Los Angeles, California.
    (다운로드 PDF go)
  • H. Haapaniemi, A. Saarenheimo, P. Smeekes, H. Talja, Numerical Simulation of Piping Vibrations using an Updated FE Model. Proceedings of the 20th International Modal Analysis Conference (IMAC), February 2002, Los Angeles, California.
    (다운로드 PDF go)
  • T. Koizumi, N. Tsujiuchi, H. Tanaka, M. Okubo, M. Shinomiya, Prediction of the Vibration In Buildings Using Statistical Energy Analysis, Proceedings of the 20th International Modal Analysis Conference (IMAC), February 2002, Los Angeles, California.
    (다운로드 PDF go)
  • C.E. Ventura, R. Brincker. E. Dascotte, P. Andersen, FEM Updating of the Heritage Court Building Structure. Proceedings of the 19th International Modal Analysis Conference (IMAC), February 2001, Kissimmee, Florida
    (다운로드 PDF go)
  • Brownjohn J M W, Xia P, Dynamic assessment of curved cable-stayed bridge by model updating, ASCE Journal of Structural Engineering 126(2), Feb 2000, p252-261
  • Brownjohn J M W, Xia P, Hao H, Xia Y, Civil structure condition assessment by FE model updating: methodology and case studies, Journal of Finite Elements in analysis and Design 37, 2001,761-775
  • R. Cantieni, S. Pietrzko, Y. Deger, Modal Investigation of an Office Building Floor, Proceedings of the 16th International Modal Analysis Conference (IMAC),
    February 1998, Santa Barbara, California.
기타 산업분야
회전부품의 동적 거동을 결정하는 가장 중요한 분석 중 하나는 Campbell 다이어그램의 결정으로 고유진동수 대 각속도의 변화를 보여준다. 기본 아이디어는 FEMTools을 사용하여 브레이드의 FE 모델을 확인한 다음 업데이트 되지 않은 모델로 얻은 Campbell 다이어그램과 업데이트 된 모델의 차이를 조사하는 것이다.
  • Y. Deger, Optimization of the Dynamic Behavior of a Machine Tool Mounting Device. Presented at the FENET/NAFEMS seminar on "FEM in Structural Dynamics", November 2001, Wiesbaden, Germany.
    (다운로드 PDF go)
  • P. Avitabile, J.M Hunnell, A. Frank, J. DeVlaminck, Study of Different Analytical Model Configurations to Account for Manufacturing Variability using Model Correlation Tools, Experimental Techniques Magazine, January/February 2001.
논문
다음은 FEMTools을 사용하여 작성된 논문이며 FEMTools에 구현된 기술을 설명하는 논문들입니다.
  • E. Dascotte, J. Strobbe, U. Tygesen, Monitoraggi Continuo Delle Grande Strutturi. Analisi e Calcolo Magazine. [An article in 3 parts translated and adapted by F. Palloni].
    Part 1: Applicazione del Digital Twin Alle Grandi Strutture, Settembre/Ottobre 2018.  (다운로드 PDF go)
    Part 2: Il Caso di Studio Dello Stonecutters Bridge a Hong Kong, Novembre/Dicembre 2018.  (다운로드 PDF go)
    Part 3: Il Caso di Studio Della Piattaforma Offshore Valdemar, Gennaio/Febbraio 2019. (다운로드 PDF go)
  • A Zanarini, Full Field Optical Measurements in Experimental Modal Analysis and Model Updating, Journal of Sound and Vibration 442 (2019) 817-842.
  • A Zanarini, Broad Frequency Band Full Field Measurements for Advanced Applications: Point-Wise Comparisons between Optical Technologies, Mechanical Systems and Signal Processing 98 (2018) 968-999.
  • M. Saidou Sanda, O. Gauron, N. Turcotte, C.-P. Lamarche, P. Paultre, M. Talbot, J.-F. Laflamme, Efficient Finite Element Model Updating for Damage Detection in Bridges. Presented at the Experimental Vibration Analysis for Civil Engineering Structures Conference (EVACES 2017), July 12-14, 2017, San Diego, California. (다운로드 PDF go)
  • S. Cooper, D. Di Maio, Experimental and Numerical Modelling of Nonlinear Complex Assembled Structures. Presented at the International Seminar on Modal Analysis 2016 (ISMA), September 19-21, 2016, Leuven, Belgium.
  • B. Weekes, D. Ewins, Effective Use of Scanning Laser Doppler Vibrometers for Modal Tests. Sound and Vibration Magazine, August 2016. See www.sandv.com
  • J. Mercer, G. Aglietti, A. Kiley, Study of Correlation Criteria for Spacecraft-Launch Vehicle Coupled Loads Analysis. Presented at the 34th International Modal Analysis Conference (IMAC), February 2016, Orlando, Florida.
  • S. Whitican, T. Copeland, Structural Testbed Design and Testing with Controlled Nonlinearities. Sound and Vibration Magazine, February 2016 (www.sandv.com).
  • T. Kodikara, T. Chan, T. Nguyen, D. Thambiratnam, Model Updating of Real Structures with Ambient Vibration Data. Presented at 7th International Conference on Structural Health Monitoring of Intelligent Infrastructure (SHMII 7), 1-3 July 2015, Torino, Italy. (다운로드 PDF go)
  • S. Oberst, Z. Zhang, J. Lai, Model Updating of Brake Components and Subassemblies for Improved Numerical Modelling in Brake Squeal. Presented at the International Congress on Sound and Vibration (ICSV22), Florence, Italy, July 2015.
  • M. Jayanthan, V. Srinivas, Structural Damage Identification Based on Finite Element Model Updating, Journal of Mechanical Engineering and Automation 2015, 5(3B): 59-63.
  • A. Cavallo, G. De Maria, M. Iadevaia, C. Natale, S. Pirozzi, Experimental Modal Analysis based on a Gray-Box Model of Flexible Structures. Presented at 12th International Conference on Informatics in Control, Automation and Robotics, July 2015, Colmar, France.
  • S. McDonald, L. Tobber, A. Gerber, C.E. Ventura, Modal Updating of a Nine-Story Concrete Core Wall Building.  Presented at the 33th International Modal Analysis Conference (IMAC), February 2015, Orlando, Florida, USA.
  • P.-V. Rosu, M. Mihaila, R. Cadarache, E. Dascotte, Correlation between Numerical and Experimental Analysis using Model Updating Techniques, Key Engineering Materials Vol. 601 (2014) pp 137-140. (다운로드 PDF go)
  • Y. Kaya, C. Ventura, M. Turek, S. Hoffman, British Columbia Smart Infrastructure Monitoring System. Presented at the 7th European Workshop on Structural Health Monitoring, Nantes, France. (다운로드 PDF go)
  • G. Hinz, K. Kerkhof, System Identification and Reduction of Vibrations of Piping in Different Conditions, Proceedings of the ASME 2013 Pressure Vessels & Piping Division (PVP2013), July 2013, Paris, France.
  • E. Dascotte, J. Strobbe, U. Tygesen, Continuous Stress Monitoring of Large Structures. Presented at the 5th International Operational Modal Analysis Conference (IOMAC), May 2013, Guimaraes, Portugal. (다운로드 PDF go)
  • T. Lauwagie, E. Dascotte, A Scenario-based Damage Identification Framework.  Presented at the 30th International Modal Analysis Conference (IMAC), February 2012, Jacksonville, Florida, USA. (다운로드 PDFgo )
  • A. Belver. S. Zovanovic, H. Dang, M. Istrate, A. Iban, Modal Testing and FE Model Updating of a Lively Staircase Structure.  Presented at the 30th International Modal Analysis Conference (IMAC), February 2012, Jacksonville, Florida, USA.
    (다운로드 PDFgo )
  • F. H. Lakzaeian,Ambient Vibration Testing and Finite Element Model Updating of a Concrete Footbridge.  Presented at the 4th International Operational Modal Analysis Conference (IOMAC 2011), May 9-11, 2011, Istanbul, Turkey.
    (다운로드 PDFgo )
  • E. Dascotte,Vibration Monitoring of the Hong Kong Stonecutters Bridge.  Presented at the 4th International Conference on Experimental Vibration Analysis for Civil Engineering Structures (EVACES 2011), October 3-5, Varenna, Italy. (다운로드 PDF go)
  • T. Lauwagie, E. Dascotte, Geometry-based Updating of 3D Solid Finite Element Models.  Presented at the 29th International Modal Analysis Conference (IMAC), February 2011, Jacksonville, Florida, USA. (다운로드 PDF go)
  • T. Lauwagie, F. Van Hollebeke, B. Pluymers, R. Zegels, P. Verschueren, E. Dascotte, The Impact of High-Fidelity Model Geometry on Test-Analysis Correlation and FE Model Updating Results.  Presented at the International Seminar on Modal Analysis 2010 (ISMA), September 20-22, 2010, Leuven, Belgium. (다운로드 PDF go)
  • T. Lauwagie, J. Guggenberger, J. Strobbe, E. Dascotte, Model Updating using Operational Data.  Presented at the International Seminar on Modal Analysis 2010 (ISMA), September 20-22, 2010, Leuven, Belgium. (다운로드 PDF go)
  • J. Guggenberger, E. Dascotte, Model Updating mit Betriebsschwinganalysen.  Presented at the VDI (Association of German Engineers) Conference "Vibration Analysis and Identification", March 23-24, 2010, Leonberg, Germany.
    (다운로드 PDF go)
  • M. Turek, C.E. Ventura, E. Dascotte, Model Updating of the Ironworkers Memorial Second Narrows Bridge, Vancouver, Canada. Presented at the 28th International Modal Analysis Conference (IMAC), February 2010, Jacksonville, Florida, USA. (다운로드 PDF go)
  • P. Dorey, Application du Recalage Modal Automatise avec le Logiciel FEMtools entre Modeles FEA. Presented at ASTELAB 2009 Conference, September 2009, Paris, France. (다운로드 PDF go)
  • T. Lauwagie, J. Strobbe, E. Dascotte, J. Clavier, M. Monteagudo, Optimization of the Dynamic Response of a Complete Exhaust System.  Presented at the 27th International Modal Analysis Conference (IMAC), February 2009, Orlando, Florida, USA. (다운로드 PDF go)
  • J. Guggenberger, Model Updating using Operational Data.  Presented at the NAFEMS Regional Seminar on Structural Dynamics, November 12-13, 2008, Wiesbaden, Germany. (다운로드 PDF go)
  • T. Lauwagie, J. Strobbe, E. Dascotte, J. Clavier, M. Monteagudo, Optimization of the Dynamic Response of a Complete Exhaust System.  Presented at the International Seminar on Modal Analysis 2008 (ISMA), September 15-17, 2008, Leuven, Belgium. (다운로드 PDF go)
  • J. Guggenberger, Fast Solutions in FSI-Problems using CMS-Methods.  Presented at the Acoustics 08 Conference, Palais de Congres, June 29 - July 4, 2008, Paris, France. (다운로드 PDF go)
  • E. Dascotte, Model Updating for Structural Dynamics: Past, Present and Future Outlook. Presented at International Conference on Engineering Dynamics (ICED), April 16-18, 2007, Carvoeiro, Algarve, Portugal. (다운로드 PDF go)
  • K. Engelen, H. Ramon, J. Anthonis, Load Spectrum Estimation from Output-Only Measurements Applied to a Spray Boom Model. Presented at  the  International Seminar on Modal Analysis 2006 (ISMA), September 18-20, 2006, Leuven, Belgium. (다운로드 PDF go)
  • C. Pestelli, F. Palloni, L. Bregant, F. Castellani,Dynamic Properties Assessment and Updating of Large Diesel Ship Engines. Presented at the 13th International Congress on Sound and Vibration (ICSV13), July 2-6, 2006, Vienna, Austria.
    (다운로드 PDF go)
  • E. Euler, H. Sol, E. Dascotte, Identification of Material Properties of Composite Beams: Inverse Method Approach. Presented at
    - the 2006 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, June 4-7, 2006, St. Louis, MO, USA.
    - the 3rd International Conference on High Performance Structures and Materials (HPSM 2006), May 3-5, 2006, Ostend, Belgium.
    (다운로드 PDF go)
  • E. Dascotte, In Search of Simulating Reality: Validation and Updating of FE Models for Structural Analysis. Presented at  the  23rd CADFEM Users' Meeting 2005, November 9-11, 2005, Bonn, Germany. (다운로드 PDF go)
  • J. Guggenberger, Anwendung von Model Updating mit FEMtools.  Presented at the  23rd CADFEM Users' Meeting 2005, November 9-11, 2005, Bonn, Germany. (다운로드 PDF go)
  • T. Lauwagie, Vibration-Based Methods for the Identification of the Elastic Properties of Layered Materials, Doctoral thesis, Catholic University of Leuven, October 2005. (다운로드 PDF go)
  • C.E. Ventura et al., FEM Updating of Tall Buildings Using Ambient Vibration Data, Presented at the EURODYN 2005 Conference, September 4-7, 2005, Paris, France. (다운로드 PDF go)
  • E. Dascotte, Correlazione tra FEA e Test, Analisi e Calcolo Magazine, June 2005  [translated to Italian by Dr. Giuseppe Miccoli] (다운로드 PDF go)